Collection: Products

10mm Senzo Synergy/Freeline Castor Adjuster Single

DOT 1This gives you the least possible amount of castor for the TonyKart / OTK chassis. The higher the number goes the MORE castor you gain.DOT...

10mm Stub Axle Castors (Single)

This is for a single castor only. You will require two for each side of your Kart. To do a full Kart you will require 4...

10mm X 22mm X 6mm Stub Axle Bearing - 6900Zz X 2

10mm high quality bearings (10mm x 22mm x 6mm) Part of The Karters Club collection, which is the biggest collection of nuts, bolts, washers, springs, general...

10mm X 25mm Stub Axle Spacer X 2

10 x 25mm Stub Axle Spacer

Automotive

10T 1/2" Clutch Drum 120mm

Please note this is for the drum only NEW heat treated silver version Included is the 10t 40/41 pitch sprocket, please not circlip is not included...

Automotive

10° KF3 Freeline Spindle Assembly 10mm

11 T Front Sprocket (Vortex)

11 T Front Sprocket (Vortex)

Automotive

11362 Comer C50 Manifold Sleeve 18 – 21mm

Manifold Sleeve for Comer C50 Dellorto Carburettor

11630 Throttle Stop – Mixture Screw Spring Rotax Dellorto

Air Screw Spring For Rotax Max Carburettor

11T Wet Clutch Engine Sprocket 22mm Bore

This offer is for a 11t 428 pitch Wet Clutch Engine Sprocket as per the photo.

12 Tooth Max-Torque #35 Clutch Comp

12t Centrifugal Clutch to fit a 3/4" (19.05mm) Crank Shaft with a 3/16 Key Slot The clutch starts to engage at 1800 rpm and becomes fully...

12 Tooth Max-Torque 428 Clutch

Max-Torque 12t 428 Pitch Complete Clutch.

12 Tooth Max-Torque 428 Clutch Drum

Suitable for the Max-Torque inner hubs only

12 Tooth Max-Torque 428 Sprocket

Sprocket for the Max-Torque genuine racing clutches.

Automotive

12 Tooth Maxtorque #35 Clutch (**Drum Only**)

12 Tooth Maxtorque #35 Clutch (**Drum Only**)

120 Piece Assorted Rubber Washers In Box

120 piece of assorted Rubber Washers in box.

Automotive

12093 Dellorto Internal Fuel Filter Rotax Max

Fuel Filter For Rotax Max Carburettor

Automotive

12094 Dellorto PHSB / VHSA / VHSB / VHSA / VHSH Fuel Filter Screw Cap Rotax

Fuel Filter Plug Screw 12.5 X 12MM M8 Thread

1210 Dunlop Taper Bush For Belt Pulley

1210 Taper Bush manufactured by Dunlop can be used as a shaft fixing on all types of industrial equipment.  With a nominal bore of 22mm this...

12mm Exhaust Cradle Spring 130mm

Suitable for any kart exhaust cradle including Iame X30 and Rotax Max

12mm Pressure Cap For Fixing Side Pods

12mm Pressure Cap For Fixing Side Pods

12mm Pressure Cap For Fixing Side Pods

12mm Pressure Cap For Fixing Side Pods

12mm X 32mm X 10mm Stub Bearing X 2 (6201Zz) X 2

Pair of 6201zz 12MM X 32MM X 10MM STUB BEARINGS