Collection: Products

1.5 Thrust Washer

INTERNAL THRUST WASHER 1.5mm Thick for V Clutch Material Harded Steel Part Number: BTVCLUTTWIN15 Genuine TKM part, legal for racing. 1.5 Thrust Washer.

Automotive

10 Tooth Max-Torque 1/2'' 40/41 Sprocket

Sprocket only to fit onto a MaxTorque clutch, replacement only for a 10t 420 pitch clutch.

Automotive

10T 1/2" Clutch Drum 120mm

Please note this is for the drum only NEW heat treated silver version Included is the 10t 40/41 pitch sprocket, please not circlip is not included...

11T Wet Clutch Engine Sprocket 22mm Bore

This offer is for a 11t 428 pitch Wet Clutch Engine Sprocket as per the photo.

12 Tooth Max-Torque #35 Clutch Comp

12t Centrifugal Clutch to fit a 3/4" (19.05mm) Crank Shaft with a 3/16 Key Slot The clutch starts to engage at 1800 rpm and becomes fully...

12 Tooth Max-Torque 428 Clutch

Max-Torque 12t 428 Pitch Complete Clutch.

12 Tooth Max-Torque 428 Clutch Drum

Suitable for the Max-Torque inner hubs only

Automotive

12 Tooth Maxtorque #35 Clutch (**Drum Only**)

12 Tooth Maxtorque #35 Clutch (**Drum Only**)

13T 428 Wet Clutch Engine Sprocket

This offer is for a 13t 428 pitch Wet Clutch Engine Sprocket as per the photo.

14T 428 Wet Clutch Engine Sprocket

14T 428 Wet Clutch Engine Sprocket

14T Clutch Basket Drive Sprocket 32mm Bore 428

14T Clutch Basket Drive Sprocket 32mm Bore 120mm Width

15mm Drive Sprocket Type 219 (45mm PCD)

55mm Width 45mm PCD   Standard karting 219 pitch

15T 428 Wet Clutch Engine Sprocket

15t suitable for a 428 pitch chain.

16 Tooth Max-Torque 219 Clutch Drum

Suitable for the Max-Torque inner hubs only

16T 219 Needle Roller Bearing Clutch 3/4"

Fits GX160 & GX200 and any other 4 stroke engine with a 3/4" (19.05mm) CrankShaft. These clutches use 219 Chain (7.8mm), This is a common chain...

16T Wet Clutch Engine Sprocket 22mm Bore

16T Wet Clutch Engine Sprocket 22mm Bore

17T Wet Clutch Engine Sprocket 22mm Bore

17T Wet Clutch Engine Sprocket 22mm Bore

18T Wet Clutch Engine Sprocket 22mm Bore

This offer is for a 18t 428 pitch Wet Clutch Engine Sprocket as per the photo.

20 Tooth Maxtorque 219 Clutch Ninja Kart

20t Centrifugal Clutch to fit a 3/4 (19.05mm) Crank Shaft with a 3/16 Key Slot The clutch starts to engage at 1800 rpm and becomes fully...

Automotive

20T Noram Be 219 Clutch Drum

19mm shaft size

22mm Brutus 12T 428 Clutch (Drum Only)

Brutus 12T 428 Clutch Drum

428 Pitch Wet Clutch Drive Engine Sprocket 22mm (7mm Key)

DRIVE SPROCKET HONDA TYPE   428 Pitch 7mm Key 22mm Bore

Automotive

A-61550US Iame Swift Clutch Drum

A-61550US IAME SWIFT CLUTCH DRUM

Aftermarket GX160 & GX200 Wet Clutch Centre 20mm

GX160 & GX200 Wet Clutch Centre 20mm